19-inch high-brightness color monitor for accurate display and diagnosis in the medical environment.

  • Supports different signal resolutions
  • Connection of digital and analog signals possible
  • DICOM Part 14 calibrated
  • Brightness stability
  • Control buttons on the front frame
Monitor - LX190 - Perfect Image Reproduction

Perfect Image Reproduction

The panel technology used enables distortion-free image geometry, high contrast values, and wide viewing angles. The monitor provides flicker-free picture, even at low refresh rates for meeting even the strictest ergonomic requirements.
Monitor - LX1910 - Different Resolutions

Display of Different Signal Resolutions

The native screen resolution is 1280 x 1024 pixels. Video signals with other resolutions, common in medical technology, are automatically adapted to the screen size. Alternatively, they can be displayed in original size (1:1).
Monitor - LX1910 - Video Inputs

Digital and Analog Video Inputs

The monitor is connected to a digital video source using DisplayPort or DVI-I. Analog video sources can be connected via DVI-I. The monitor automatically adjusts to display the connected analog video source. Where certain signal timings prevent this, the On Screen Display (OSD) can be used to easily adjust the settings. The supplied D-Sub - DVI and BNC - D-Sub adapters allow connection to legacy analog systems.
Monitor -LX1910 - Consistency DICOM Part 14

Consistency with DICOM Part 14 Calibration

The monitor is calibrated to meet the DICOM Part 14 standard for consistent image transmission. The five default presets contain practice-based settings. They take into account the DIN 6868-157 room classes, thereby meeting current specifications for diagnostic monitors.

Fully Automated Stability

The monitor has a fully automatic stability system that guaranties fast luminance stabilization during system start and keeps the brightness consistent. A built-in backlight sensor ensures the monitor maintains its luminance over time and compensates for fluctuations in brightness that occur during operation due to different ambient temperatures.

Installation on a VESA Mount

Compliance with the VESA standard enables attachment to existing mounting accessories like ceiling suspensions or the attachment of the stand.

Easy Access to Control Buttons

The monitor’s On Screen Display (OSD) is easily accessed via buttons on the front frame. This allows streamlined use when the monitor is mounted side by side to another screen, such as in a ceiling suspension. The OSD buttons can be locked to prevent accidental or unauthorized adjustment of the monitor.

Versatile Positioning for Improved Ergonomics

EIZO's highly versatile stand offers tilt, swivel and a wide height adjustment range enabling you to use the monitor with greater comfort.



Model VariationsLX1910: without stand
LX1910-S: with stand
Cabinet ColorBlack
Certifications & Standards (Please contact EIZO for the latest information)CE / UKCA (Medical Device), IEC/EN60601-1, CAN/CSA C22.2 No. 60601-1, ANSI/AAMI ES60601-1, EN60601-1-2 Class B, FCC-B, RoHS, China RoHS, WEEE, CCC, BIS
Supplied Accessories (May vary by country. Please contact EIZO for details)Adapter (D-Sub - DVI), adapter (BNC - D-Sub), Utility Disk (PDF Instructions for Use)


TypeTFT Color-LCD Panel (IPS like)
Size48.3 cm / 19"
Native Resolution1280 x 1024 (5:4 aspect ratio)
Viewable Image Size (H x V)376.32 x 301.06 mm
Pixel Pitch0.294 x 0.294 mm
Display Colors8-bit colors: 16.77 million colors
Viewing Angles (H / V, typical)178° / 178°
Brightness (typical)700 cd/m²
Recommended Brightness for Calibration400 cd/m²
Contrast Ratio (typical)1000:1
Response Time (typical)13 ms rising, 12 ms falling

Video Signals

Input TerminalsDisplayPort, DVI-I (digital and analog RGBHV)
Digital Scanning Frequency (H / V)30 - 100 kHz / 50 - 85 Hz
Analog Scanning Frequency (H / V)30 - 100 kHz / 50 - 85 Hz
Sync FormatsSync Separate, Composite Sync and SoG


UpstreamUSB 2.0: Type-B
(communication between monitor and connected PC)
DownstreamUSB 2.0: Type-A
(communication with external devices)


Power RequirementsAC 100 - 240 V: 50 / 60 Hz
Maximum Power ConsumptionLess than 45 W
Power Save ModeLess than 2 W
Power ManagementDigital: DVI DMPM
Analog: VESA DPM
Power OutputDC 5V, 1A (Hirose)

Features & Functions

MiscellaneousPrioritised input (DVI-A) for emergency signal
SensorBacklight Sensor
OSD LanguagesEnglish, German

Environmental Requirements

Degree of ProtectionIP20

Physical Specifications

Net WeightLX1910: 4.3 kg
LX1910-S: 6.1 kg
Hole Spacing (VESA Standard)100 x 100 mm, M4, depth 5-10 mm


Single Product Brochure LX1910

Single Product Brochure LX1910

762.20 KB

download / open in browser

CuratOR Products

CuratOR Products

11.35 MB

download / open in browser


Instructions for Use LX1910

Instructions for Use LX1910

1.14 MB

version 002, valid from 08/2022

download/ open in browser